Assorted TSZtech 5-pack

Assorted TSZtech 5-pack


2015895 Assorted TSZtech 5-pack
Shape Number260.8Z
Minor Diameter.3mm
Major Diameter1.3mm
Abrasive Length8mm

Easily convert shape numbers from other brands
Convert My Shape Number
Shape Number285.5Z
Minor Diametern/a
Major Diameter2.2mm
Abrasive Length5mm
Shape Number703.8KRZ
Minor Diameter1.1mm
Major Diameter1.8mm
Abrasive Length8mm
Shape Number125Z
Minor Diametern/a
Major Diameter1.7mm
Shape Number770.8Z
Minor Diameter1.2mm
Major Diameter1.7mm
Abrasive Length8mm
Available in convenient 5-packs.

Did you know?
Only the Two Striper® diamond bur is manufactured with the P.B.S.® diamond-particle bonding process.
Consistent Performance/Superior Quality

  • 100% Ring Gauge Inspection for Shank Concentricity
  • 100% Visual Inspection
  • 100% Weight Control for Diamond Coverage

Discover the Technology

Faster, Cooler Cutting and Longer Lasting

P.B.S.® braze is a bonding process that maximizes the exposure of diamond-cutting surfaces – especially at the tips and upper circumference of the diamond instrument where most cutting occurs. Crystals, placed evenly and precisely in a uniform matrix, are fused permanently to a surgical-grade stainless-steel shank; they are guaranteed not to fall out.

Diamond particles on electroplated tools are trapped mechanically in inconsistent plating layers that can expose either too much or too little of the particle. Some particles are attached loosely and are prone to premature dislodgement. Other particles are buried completely in the plating layer and are unavailable to cut tooth structure, creating unnecessary heat and friction. Electroplated diamonds cut less consistently than Two Striper® diamonds1 and have a shorter product life. The combination of permanent crystal attachment, precise placement at the top and maximum crystal exposure makes Two Striper® faster, cooler cutting and longer lasting.

Natural, virgin diamond crystals on Two Striper® rotary instruments contain more corners and angles than the synthetic diamonds used on electroplated burs.

Two Striper® optimal coarse grit is preferred over supercoarse grits.

Super-coarse particles are bigger and require more plating to hold them. More plating means less diamond coverage overall. A recent study found no difference in cutting rates between electroplated coarse and super-coarse diamond grits2 . While matching performance, Two Striper® offer cooler cutting and are longer lasting! Two Striper® optimal coarse-grit diamond crystals are attached permanently and are guaranteed never to strip or peel.


  • Highest rated all ceramic-cutting especially effective on today’s new generation of tougher ceramic materials.
  • Those materials include but are not limited to:
  • IPS e.max®
  • BruxZir®
  • Lava™ Plus
  • Cercon®
  • Zirlux® FC
  • Obsidian
  • IPS Empress
  • Procera®
  • Lava™ Ultimate
  • TSZtech® Contraindications – Will not cut or separate metal.
  • Recommended for Zirconia and Lithium Disilicate.


® IPS e.max, BruxZir, Cercon, Zirlux FC, IPS Empress, Procera are not registered trademarks and Lava Plus, Lava Ultimate and Obsidia are not trademarks of Premier Dental Products Company.

Intra-oral Adjustments


285.5Z Football

Image courtesy of Shalom Mehler D.M.D.

Atraumatic Crown and Bridge Removal


770.8Z Round-End Taper
Section and Remove

Images courtesy of Abdi Sameni D.D.S.

Endodontic Access


125Z Round