Safe-centered -
faster than metal-centered disks

• Safe-center - protects composite surface
• Thin and flexible - conforms to tooth anatomy
• Fast, systematic finshing and polishing - 4 color-coded grits quickly slip on to supplied mandrel. Two sizes - 1/2” for greater efficiency, 5/16” for control in gingival areas.
• Use at 10,000 rpm to 15,000 rpm

EC Representative: MDSS GmbH * Schiffgraben 41 30175 Hannover, Germany.

Glaze-like, multi-surface polishing - featuring advance open-weave fibra pre-polishers
and 100% wool paste applicators - for a super-charged mirror polish.

• Pre-polish with Fibra Points (barrel, wheel or taper); open-weave design generates significantly less heat.
• Final polish with Diamond Twist Super-Charged Polishing Paste applied with felt barrel, wheel or point for a glaze-like polish.
  
  

  2019000

  Diamond Twist SCL Kit Contains: one each of the following: 6g Diamond Twist Polishing Paste Dispenser, Felt Point, Felt Barrel, Felt Wheel (Thick), Felt Wheel (Thin), Fibra Point (Barrel), Fibra Point (Taper), Standard Mandrel, SurGrip Mandrel, Fibra Wheel (Thin), Fibra Wheel (Thick).

  
  

Diamond Twist SCO™ - Intr-Oral Polishing Kit

After permanent seating and adjustments,
polish crowns, inlays, onlays and nano-hybird composites intra-orally in one easy step using Diamond Twist Super-Charged Polishing Paste.

• Use the flat or taper polishing brushes (autoclavable) for posterior occlusal surfaces.
• Use the Micro-Cloth disks for polishing and final high-gloss buffing.
• Twist syringe avoids cross-contamination and dispenses just the right amount.
  
  

  2019002

  Diamond Twist SCO Kit Contains: (1) 3g Diamond Twist Polishing Paste Syringe, (6) 1⁄2” Micro-Cloth Disks Dark Blue, (6) 5⁄16” Micro-Cloth Disks Light Blue, (1) RA Mandrel, (4) Flat Polishing Brushes and (2) Tapered Polishing Brushes.

  
  
  EC Representative: MDSS GmbH * Schiffgraben 41 30175 Hannover, Germany.

MF1 (45µ)

MF3 (20µ)

MF3 (10µ)

Reality

MFS® diamonds provide a very smooth surface when finishing composites, glass ionomer or porcelain restorations. MFS®-finished restorations reflect light,
look natural and will not stain or retain plaque. Use two grits for best results.

Luminescence™ then can be used for the final polish.

All the right HP tools for Adjustments and Refinements to Ceramic CAD/CAM Restorations

The Two Striper CAD/CAM Lab Finishing Kit is designed for fast and precise ceramic adjustments and surface refinements. The Kit consists of a fourteen hole HP anodized aluminum bur block that contains a double-sided Thin-Flex® diamond disk to remove the sprue and seven PBS bonded Two Striper lab diamonds to complete gross anatomy adjustments, simple contours, or removal of surface irregularities. Ideal for adjusting any ceramic restoration milled by chairside or in-lab CAD/CAM systems.

• All-surface polishing – Composite + porcelain + enamel + glass ionomer + precious metals + amalgam
• Single-grit/Single-step paste – Saves chair time
• Increase patient comfort – Contains potassium nitrate topical desensitizerl
• Convenient – Screw-tube dispenser + improved viscosity eliminates waste
  

Original formula

Reality

COMPO-STRIPS® are thin, flexible, one-sided diamond abrasive strips available in two sizes and three grits: fine, medium and coarse. They have an uncoated safe center for easy access through the contact point and are ideal for finishing Class III, IV and veneer restorations.

For extremely tight contacts, use a COMPO-DISC® to gain access. Safe-sided, edge and face-cutting.